Zimbabwe reference library   /   Independent information
Aluminium Zimbabwe
Maintenance / Guide 06

Aluminium corrosion, cleaning and maintenance: look for the cause before treating the stain

Understand exposure, dissimilar-metal contact, trapped moisture and sensible maintenance records.

Corrosion-resistant does not mean corrosion-proof

Aluminium naturally forms a protective oxide surface, but actual performance depends on alloy, finish, environment and design. Some chemicals and exposure conditions can damage the surface or accelerate local attack. A white deposit, stain, pitting or a coating defect should be investigated in context rather than assigned a diagnosis from its colour alone.

Record where the change occurs, how long it has been present and what the material contacts. Note cleaning products, construction chemicals, standing moisture and nearby metalwork. Photographs over time can help a competent person assess progression. If the item is structural or safety-critical, appearance-based reassurance from a website is not enough.

Pay attention to connections and trapped conditions

Contact between dissimilar metals in the presence of moisture can create a galvanic-corrosion concern. Hydro’s technical discussion highlights the importance of considering metal contacts and separation in aluminium design. The appropriate fasteners, isolation details and drainage should be selected for the actual assembly by the responsible designer or manufacturer.

Do not replace fasteners simply by choosing something labelled stainless steel or adding an improvised washer. Connection behaviour also depends on loads, geometry, coatings and the full environment. Similarly, covering a joint with sealant can trap a problem if the detail requires drainage. Establish the purpose of the existing detail before changing it.

Use approved cleaning methods

Obtain the care instructions for the actual finish and assembly. Use the recommended products and techniques, and test a suitable inconspicuous area only where the instructions permit. Avoid treating strong acid, alkali, abrasive pads or a household chemical mixture as a universal aluminium cleaner. What removes a stain may also damage a coating, seal or adjacent glass.

Plan safe access, especially for upper floors and large panels. Cleaning should not require someone to lean dangerously through an opening or stand on an unsuitable support. If access was never designed into the installation, arrange an appropriate professional method. Maintenance convenience is worth discussing before the original product is purchased.

A useful maintenance log

Identify the product, finish, installation date if known, supplier instructions, inspection dates, cleaning performed and any observed defects. Record changes in hardware operation or water entry as well as appearance. A repeated problem in the same location suggests a cause that cleaning alone may not resolve.

In Zimbabwe, assess the site’s actual exposure rather than a national generalisation: a sheltered interior, a dusty road frontage and a chemical-processing area are different situations. Contact the supplier or an appropriate specialist when a defect progresses, a coating fails repeatedly or safety is uncertain. Keep warranty communication and repair approvals with the log so that later maintenance does not unknowingly invalidate an agreed remedy.

  • Record the location, contacts, chemicals and moisture conditions.
  • Treat safety-critical deterioration as a professional assessment issue.
  • Follow care instructions for the actual finish.
  • Do not alter connections or drainage casually.
  • Investigate recurring damage instead of repeatedly hiding it.

Sources & further reading

Use these references to check the underlying guidance and any current local requirements. Practical worksheets and illustrative examples in this guide are original educational material.

  1. Hydro — aluminium design study, corrosion and maintenance discussion
  2. Hydro — aluminium surface treatment
  3. Hydro — anodizing and mechanical surface treatment

This guide is general information. Source notes are not a claim of independent professional review.